Setting The Channels - Sony KLV-15SR1 Operating Instructions Manual

Ir_stNI ng and Cor_r_ec_ingthe IV
Setting the Channels
After you finish connecting your TV, you can run
Auto Program to set up your channels. The Auto
Program screen appears when you turn your TV on
for the first time after installing it.
To skip channels, see page 21.
1
Auto Program is set to scan cable TV channels by
default. To watch UHF channels with an antenna, see
"To watch UHF channels with an antenna" below.
To
1
2
3
perform Auto Program again
Press MENU.
Press i_/_ to select _ (Channel), then press
(5i3.
Press i_/,1_to select "Auto Program," then press
(3D.
"Auto Program" appears and the TV starts
scanning and presetting channels automatically.
When all the receivable channels are stored, the
"Channel Skip/Add" menu appears. Using this
menu, you can start skipping unwanted channels
(See "To skip channels" on page 21).
4 Press MENU to exit the menu screen.
To cancel Auto Program
While "Auto Program" is displayed in step 3, press
MENU on the remote control.
2
1
Press POWER on the TV. The Auto Setup menu
appears.
Auto Program: [CH+]
Exit: [CH-)
First please connect
cable/antenna
2
Press CH+ on the remote control or on the front
panel of your TV to perform Auto Program.
When all the receivable channels are stored, the
"Channel Skip/Add" menu appears. Using this
menu, you can start skipping unwanted channels
(See "To skip channels" on page 21).
Note
To watch cable TV channels, you have to subscribe to a cable
TV company. Note that cable TV cannot be received in some
areas. This TV receives 1- 125 cable TV channels. For details on
cable TV subscription, consult your nearest cable TV company.
To watch UHF channels with an antenna
1 Press
MENU.
2
Press i_/,1_to select _ (Channel), then press
(3D.
3 Press */_ to select "Cable," then press (5}D.
4 Press t_/_ to select "Off," then press (SD.
5 Perform step 3 in "To perform Auto Program
again" above.
Note
You cannot receive and set the cable TV channels and UHF
channels at the same time.
When you have a cable box or satellite receiver
connected
The Channel Fix feature is useful when you have a
cable box or satellite receiver connected. For details,
see page 21.
2O