Connecting A Dvd Player With Component Video Connectors - Sony WEGA KLV-23HR1 Operating Instructions Manual

Installing and Connecting the TV
Connecting a DVD Player with Component Video
Connectors
16
This is the preferred hookup to use if:
• Your DVD player has component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the DVD player's
Y, B-Y and R-Y jacks to the Y, P
VIDEO 3 IN connections.
Tip
The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled as Y, C
or Y, P and P . If so, connect the cables to the matching colors.
B R
2
Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
Note
The Y, B-Y and R-Y jacks do not provide audio, so audio cables must be connected to
provide sound.
Rear of TV
VHF/UHF R-AUDIO-L VIDEO
VIDEO 1 IN
AUDIO-R (red)
AUDIO-L (white)
RK-74A
(not supplied)
Tips
• To take advantage of the Wide Screen Modes, set the TV's aspect ratio to 16:9 on your
DVD player. For details, refer to the operating instructions supplied with your DVD player.
• Some DVD players are equipped with the three component video connectors: Y - Green, P
(C , C or B-Y) - Blue and P
B b R
and P jacks on the TV. Use the
B R
S VIDEO R-AUDIO-L Y P P R
B R
VIDEO 3 IN AUDIO OUT
P
P
Y
VMC-10HG
(not supplied)
DVD player
(C , C or R-Y) - Red.
R r
and C ,
B R
L DC IN 14.5V
R
B
B