Ir_stNI ng and Cor_r_eo_ingthe IV
Connecting a Digital Satellite Receiver
Disconnect
all power sources before
making any connections.
1
Using three separate
component
video cables, connect the Digital
Satellite Receiver's
Y, PB and PR jacks to the Y, PB and PR jacks on the
TV. Use the VIDEO 2 IN connections.
Note
This TV supports
only the 480i signal format.
If the TV receives
a signal other than 480i,
"Non Supported
Video Format"
appears
on the screen.
2
Using an AUDIO
cable, connect the Digital Satellite
Receiver's
AUDIO
OUT jacks to the TV's AUDIO IN jacks.
Note
The Y, P_ and PR jacks do not provide
audio,
so audio cables
must be connected
to
provide
sound.
Rear of TV
Digital Satellite Receiver
(SAT-HD200)
2
RK-74A
(not supplied)
18