Connecting A Dvd Player With - Sony WEGA KLV-26HG2 Operating Instructions Manual

Ii"_stalling ad Col"_/'_oc__sg TV
Connecting a DVD Player with Component Video
Connectors
This is the preferred hookup to use if:
• Your DVD player has component (Y, Ps, PR)jacks.
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the DVD player's Y, Ps and PR
.jacks to the Y, Ps and PR jacks on the TV. Use the VIDEO 3 1N
connections.
Tip
The Y, Ps and PRjacks on your DVD player are sometimes labeled as Y, Cs and C_, or Y,
B-Y and R-Y. If so, connect the cables to the matching colors.
2 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
Note
The Y, Ps and Pa jacks do not provide audio, so audio cables nmst be connected to
provide sound.
Rear of TV
iiiiiiiiii!ii
Component
video cable
(not supplied)
Tip
• To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9
on your DVD player. For details, refer to the operating instructions supplied with your DVD
player.
16