Sony Handycam DCR-SX83 Operating Manual page 54

The recording stops.
• The temperature of your camcorder is
extremely high/lox_ Turn off your camcorder
and leave it fbr a while in a cool/warm place.
"PMB"cannot be installed.
• Check the computer environment or
installation procedure required to install
"PMB" (p. 32).
"PMB"does not work correctly.
• Quit "PMB" and restart your computer.
The camcorder is not recognized by the
computer.
• Disconnect devices froin the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
• Disconnect the USB cable from the computer
and your camcorder, and restart the computer,
tt_en connect the computer and your
camcorder again in an orderly manner.
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized SoW
ser'dce i:acility. In this case, when you
contact them, give them all the numbers of
the error code beginning with (2 or E,
C:04:1717
• The battery pack is not an "InfoLITHIUM"
battery pack V series. Use an "InfoLITHIUM"
battery pack (V series) (p. 14).
• Connect the DC plug of the AC Adaptor to
your camcorder securely (p. 14).
C:06"DD
• The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:I 3:rTr7 / C:32:rTr7
• P.enmve the power source. Reconnect it and
operate your camcorder again.
E:_IT:IT[Z]
• Follow the steps from @ to @ on page 53.
c\_
• Battery power is low.
A_I-"I
• The battery pack temperature is high. Change
the battery pack or place it in a cool place.
• No memory card is inserted (p. 19).
• When the indicator flashes, there is not
enough free space tot recording images. Delete
unnecessary images (p. 19), or format the
memory card after storing the images on other
media.
• The Image Database File is damaged. Check
the data base file by touching _ (MENU)
-+ [Show others] _ [REPAIR IMG.DB El
k
(under _ [MANAGE MEDIAl category)
the recording medimn.
• The memory card is damaged. Format the
memory card with your caincorder (p. 51).
• Incompatible memory card is inserted (p. 19).
{_ o---n
• Access to the memory card was restricted on
another device.