Sony Handycam DCR-SX83 Operating Manual page 33

Confirm that your camcorder is
not connected to the computer.
Turn on the computer.
• Log on as an Administrator Ibr
installation.
• Close all applications running on the
computer bdore installing
the software.
then click [Next] --_ [Install].
Turn on your camcorder, then
connect the camcorder to the
computer using the supplied USB
cable.
Place the supplied CD-ROM in
the disc drive of your computer.
The installation screen appears.
• If the screen does not appear, click
[Start] _ [Computer] (in Windows
XR [My Computer]), then double-click
[SONYPMB (E:)] (CD ROM) _.
× Drive names (such as (E:)) may vary
depending on the computer.
Click [Install].
Select the country or region.
Select the language for the
application to be installed, then
proceed to the next screen.
Read the terms of the license
agreement carefully. If you agree
to the terms, change @ to _, and
N
The [USB SELECT] screen appears on
the camcorder screen automatically.
Touch the one of the media types
displayed on the camcorder
screen to make the computer
recognize your camcorder.
[I_IUSB CONNECT] (Internal
memory)
• Tile displayed recording media difi%r
depending on the model.
• If the [USBSELECT]screen does not
appear,touch
_ (MENU) _ [Show
others] _ [USBCONNECTI (under (_
[OTHERS] category).
Click [Continue] on the computer
screen.
m
Follow the on-screen instructions
to install the software.
• Connect tile camcorder to tile computer
during the installation of"PMB2
• Depending on the computer, you may
need to install third party software. If
the installation screen appears, fbllow
the instructions to install the required
<.
g
<o
o_
o
8
8
"u
oD
_3