Sony Handycam DCR-SX83 Operating Manual page 406

software.
• Restart the computer if required to
complete the installation.
When the installation is completed,
following icons will appear.
Remow, the CD-ROM from your
computer,
To disconnect your camcorder from the
computer
(X) Click the _v) icon at the bottom right of the
desktop of the computer _ [Safely remove
USB Mass Storage Device].
@_: Starts "PMB:'
_,: Displays "PMB Help."
_:i:: Displays "PMB Launcher."
"PMB Launcher" enables you to start
"PMB" or other software, or to open
web sites.
• Other icons may appear.
• No icon may appear depending on the
installation procedure.
(_ Notes
• To create discs or use other fimctions on
Windows XP, Image Mastering API v2.0 *br
Windows XP should be installed. If Image
Mastering API v2.0 fbr Windows XP has not
been installed yet, select it from required
programs on the installation screen and install
it *bllowing the procedures displayed. (The
computer must be connected to the internet
fbr the installation.) 5_u may install hnage
Mastering API v2.0 fbr Windows XP in
response to the message displayed when you try
to start those functions.
@ Touch [END] _ [YES] on the camcorder
screen.
@ Disconnect the USB cable.
{_) Notes
• Access from the computer using the supplied
so*}ware "PMB2 Do not modil_ the files or
fblders on the camcorder from the computer.
The image files may be destroyed or may not be
played back.
• Operation is not guaranteed, if you per*brm the
above operation.
• When you delete image files, fbllow the steps
on page 30. Do not delete the image files on the
camcorder directly from the computer.
• Do not copy the files on the recording
media from the computer. Operation is not
guaranteed.