Initializing Your Printer; Reformatting The Hard Disk Drive - Epson Color Laser Printer Owner's Manual

2. Press the Enter button.
3. Press the Down button until Network Status Sheet appears
on the LCD panel.
4. Finally, press the Enter button to print a network status sheet.
Note:
You cannot print a status sheet in the following cases: the printer
has started printing, it is offline, or it is not ready to print.
See the Reference Guide for more information on the printer's
control panel.

Initializing Your Printer

To initialize your printer, turn on the printer while pressing the
Cancel Job button on the printer's control panel.
Caution:
c
Note that all changes made to the printer and network settings
are cleared when you initialize the printer using this method.
Therefore, do not initialize your printer except in the case you
forget the EpsonNet WinAssist/MacAssist/WebAssist password.

Reformatting the Hard Disk Drive

To reformat the Hard Disk Drive, follow the instructions below.
1. Make sure the printer is turned off.
2. Hold down the Down button while you turn on the printer.
Troubleshooting
12
12
12
12
12
12
12
12
12
12
12
12
251