Mac Os 8.X To 9.X; Mac Os X - Epson Color Laser Printer Owner's Manual

Note:
To print using the AppleTalk protocol and configure the print server
with EpsonNet MacAssist, select Ethernet or Built-in Ethernet on the
AppleTalk Control Panel or the AppleTalk tab. Then configure the
print server with EpsonNet MacAssist.

Mac OS 8.x to 9.x

1. From the Apple menu, select Control Panel, and then TCP/IP.
2. Set Connect via to Ethernet.
3. Assign an IP address and other settings if necessary.
4. Close the dialog box to save any changes.
Go to the next chapter "Connecting the Print Server to the
Network" on page 35.

Mac OS X

1. From the Apple menu, select System Preferences.
2. Open the Network control panel. Click the TCP/IP tab.
3. Select Built-in Ethernet from the Show pull down menu.
4. Assign an IP address and other settings if necessary.
5. Click the Apply Now button to save any changes.
Go to the next chapter "Connecting the Print Server to the
Network" on page 35.
34
Installing Components on Your Computer