Table of Contents
Advertisement
17. In the Print Server dialog box, select the assigned printer from
the printer object list, and click the Printer Number button to
set the printer number from 0 to 15, then click OK.
18. To confirm the objects you have assigned, double-click the
Print Server object icon. Click Print Layout, and check that the
print server, printer, and print queue are connected.
Configuring for NetWare using EpsonNet WinAssist
1. Turn on your printer.
2. Load the print server from the file server's system console
which the print queue volume is set.
>LOAD PSERVER print server name you set using
PCONSOLE
3. Configure the print server using EpsonNet WinAssist. See
"NetWare" on page 63 for details.
If NetWare objects are already created, you can also use
EpsonNet WebAssist. See "NetWare" on page 223 for details.
Using NDS Remote Printer Mode (NetWare
4.x/5.x/6.0)
Follow the steps below to make the printer environment using
NWAdmin under NetWare 4.x, IntranetWare, NetWare 5.x, or
NetWare 6.0 with NDS mode.
Creating objects
1. From any NetWare client, log in to the target context of the
NDS tree as an ADMIN.
2. Run the Administrator tool (NWAdmin).
142
Settings for NetWare Server
Advertisement
Table of Contents
