Epson Color Laser Printer Owner's Manual page 153

Note on using the Adobe PostScript 3 Kit:
If the NetWare server is bound with both IP and IPX protocols, two
Printer Agents (one being LPR Printer Agent and the other IPX
Printer Agent) are created automatically. When you select one of
the Printer Agents for the PostScript printer driver, select the other
for the ESC/Page printer driver. The Printer Agent name cannot be
changed, so be sure to remember which Printer Agent is associated
with the PostScript or ESC/Page printer driver.
If the NetWare server is bound with only IP protocol, only one LPR
Printer Agent is created. You need to create one more LPR Printer
Agent manually. Be sure to select Remote (LPR on IP) for the port
handler type and set a unique Printer Agent name so you can tell
which Printer Agent is associated with the PostScript or the
ESC/Page printer driver.
If the NetWare server is bound with only IPX protocol, only one
IPX Printer Agent is created. In this case, you cannot create another
IPX Printer Agent manually. To avoid this, be sure to bind both the
IP and IPX protocols to the NetWare server first.
Creating a Printer Agent manually
You can create Printer Agents, either public access printers or
controlled access printers. The way to create a Printer Agent
differs depending on the printer type you choose.
Note on using the Adobe PostScript 3 Kit:
If you want to use a printer as a PostScript and ESC/Page printer and
want to install the printer driver automatically to the client computer,
you must create two Printer Agents: one for the PostScript printer driver
and the other for the ESC/Page printer driver. If you create one with
Remote (rprinter on IPX), create the other with Remote (LPR on IP).
You can create two LPR Printer Agents but cannot create two IPX
Printer Agents for the same printer.
1. Select a printer type (either public access printer or controlled
access printer).
Settings for NetWare Server
6
6
6
6
6
6
6
6
6
6
6
6
153