Instructions For Using Netware - Epson Color Laser Printer Owner's Manual

Instructions for Using NetWare

Printing a text file
When you print a text file using the NPRINT command of
NetWare or DOS, redirection, misconversion or a gap in
characters may occur depending on the client environment.
IPX routing protocol "NLSP"
It is possible to set the IPX routing protocol "NLSP" from
NetWare 4.x or later; however, the print server does not
support NLSP. RIP/SAP controls the communication.
You can select the routing protocol from a) NLSP with
RIP/SAP Compatibility, or b) RIP/SAP Only. If you remove
the bind of RIP or SAP when NLSP with RIP/SAP
Compatibility is specified, the print server then cannot
communicate with the file server and NDS. (See "Protocols"
and "Bindings" in NetWare's INETCFG utility.)
Bindery and NDS
You can check the bindery context path from the server
console by using the SET BINDERY CONTEXT command.
If the bindery context path has not been set, or if you want to
use the printing environment of another context from a
non-NDS client, you need to specify the context for the
bindery context. Use the SET BINDERY CONTEXT command
to set the context in the AUTOEXEC.NCF file.
You cannot use the bindery print server mode with EpsonNet
WinAssist if you are running Novell Client for
Windows 95/98 version 3.00 or Novell Client for
Windows NT version 4.50. To configure the print server for
bindery mode, use Novell IntranetWare Client or EpsonNet
WebAssist.
See your NetWare documentation for more information.
Settings for NetWare Server
6
6
6
6
6
6
6
6
6
6
6
6
133