Remote Printer Mode
Items
Primary Print Server
Name
Printer Port Number
TCP/IP
IP Address Settings
Items
Method for Acquiring the IP
Address
IP Address
Subnet Mask
Default Gateway
Set Using Automatic Private
IP Addressing (APIPA)
Set Using PING
224
EpsonNet WebAssist
Explanations
Enter the primary print server name (up to 47
characters).
Enter the printer port number (0 to 254).
Explanations
Select a method for acquiring IP addresses. If
Auto is selected, DHCP becomes available. To
use the DHCP server, make sure it is installed on
your computer and correctly configured. See your
operating system's online help for detailed
instructions.
To set the IP address manually, select Manual.
Enter an IP address for the print server. Be sure
the IP address does not conflict with any other
devices on the network.
Set the subnet mask.
Set the gateway address if needed.
Select Enable to get a private address between
169.254.1.1 and 169.254.254.254 automatically
when an IP address cannot be obtained by the
DHCP server; otherwise, select Disable.
Enables or disables IP address setting using the
ping command.