Netware - Epson Color Laser Printer Owner's Manual

DNS Server Addresses
Acquire host name and
domain name automatically
Host Name
Domain Name
Register the network
interface's address to DNS
server
Register directly to DNS
server
Use Universal Plug and
Play
Device Name

NetWare

To use the printer in the NetWare environment, configure the
print server for NetWare. You can configure the print server in
either the Print Server mode or the Remote Printer mode.
Displays the DNS server address. To enter the
DNS server address, click the Add button.
To edit the DNS server address, select the
address and then click the Edit button.
To delete the DNS server address, select the
address and then click the Delete button.
Select this check box if you want to acquire the
host name and domain name from the DHCP
server.
Enter the host name supported by Dynamic DNS
(between 2 and 63 characters). The total number
of characters of the host name and the domain
name must not exceed 251.
Leave it blank or enter two or more characters of
the domain name supported by Dynamic DNS.
The total number of characters of the host name
and the domain name must not exceed 251.
Select this check box if you want to register the
host name and the domain name to the DNS
server through the DHCP server that supports
Dynamic DNS.
Select this check box if you want to register the
host name and the domain name directly on the
DNS server.
Enables or disables Universal Plug and Play. It is
dimmed if this function is not supported.
Enter the device name for Universal Plug and Play
(between 2 and 63 characters).
EpsonNet WinAssist Configuration Utility
3
3
3
3
3
3
3
3
3
3
3
3
63