Epson Color Laser Printer Owner's Manual page 90

Method for specifying the
IP address
Set using PING
Set using Automatic
Private IP Addressing
(APIPA)
IP Address
Subnet Mask
Default Gateway
Extended Settings
90
EpsonNet MacAssist Configuration Utility
Select a method for specifying an IP address. When
you select Automatic, an IP address, subnet mask,
and default gateway are automatically assigned by
the DHCP server.
Note:
If the Dynamic DNS function is not supported, we
recommend that you select Manual and then enter
an IP address. This is because if you select
Automatic, the IP address of the print server changes
every time you turn on the printer so that you need to
change the printer port setting accordingly.
Select this check box when setting the IP address
using the ping command. When not using the ping
command, clear this check box.
Assigns a private IP address automatically even
there is no DHCP server on your network. It is
dimmed if this function is not supported.
Enter an IP address for the print server. Be sure that
the IP address is unique and does not conflict with
any other device on the network.
Enter the subnet mask of the IP address.
Enter the gateway address. If there is a server or a
router that functions as a gateway, enter the IP
address of the server or the router. If there is no
gateway, leave the default values.
Click this button for extended settings such as
Dynamic DNS and Universal Plug and Play. If both
functions are not supported, this button is dimmed.