Table of Contents
Advertisement
_
Specifying
Control
Panel
Items
You can use the following procedure to specify the eight items you want on the
Control Panel.
1.
While the Control
Panel is displayed,
press
[MENU].
• This will display a menu of Control Panel items,
with the items currently selected for display
shown in green.
2. Use [A], [_'], [<],
and [,]
to select an item
you want on the Control Panel and then press [SET].
This will cause the lamp next to the item to light.
.
Repeat the above step to select eight items for the Control Panel.
After you select the eighth item, the camera switches to the REC mode and
displays the Control Panel.
• To exit the item select operation, press [MENU].
_NOTE
• The "Date/Time"
item at the bottom of the Control Panel is fixed and cannot be
changed.
• The screen shots in this manual show the initial default Control Panel items.
• To return the Control Panel items to their initial defaults, reset the camera (page
161).
32
Snapshot Tutorial
Advertisement
Table of Contents
