Table of Contents
Advertisement
•
Locations
To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so creates
the risk of fire and electric shock.
- Areas subject to large amounts of humidity or dust
- Food preparation areas or other locations where oil smoke is present
- Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed
vehicle parked in the sun, or other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can
cause the camera to fall, creating the risk of personal injury.
•
Backing
Up Important
Data
• Always keep backup copies of important data in camera memory by transferring
it
to a computer or other storage device. Note that data can be deleted in the case of
camera malfunction, repair, etc.
•
Memory
Protection
• Whenever replacing the battery, be sure to follow the correct procedure as
described
in the documentation
that comes with the camera. Incorrectly replacing
the battery can result in corruption or loss of data in camera memory.
•
Rechargeable
Battery
• Use only the specified charger unit or the specified device to charge the battery.
Attempting
to charge the battery by an unauthorized
means creates the risk of
battery overheating,
fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing so can
damage the battery, and cause deterioration
of its performance
and loss of service
life.
• The battery is intended for use with a CASIO Digital Camera only. Use with any
other device creates the risk of the battery damage, or deterioration
of battery
performance and service life.
• Failure to observe any of the following precautions creates the risk of battery
overheating,
fire, and explosion.
- Never use or leave the battery near open flame.
- Do not expose the battery to heat or fire.
- Make sure the battery is oriented correctly when it is connected
to the charger
unit.
- Never carry or store the battery together with items that can conduct electricity
(necklaces,
pencil lead, etc.)
- Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never
place the battery into a microwave oven, heater, high-pressure generating
device, etc.
166
Appendix
Advertisement
Table of Contents
