Table of Contents
Advertisement
il!i]ii_i__L_i_,
[MENU]
---_ Set Up Tab ---_ File No.
Use the following procedure to specify the rule that governs generation of the serial
number used in file names (page 140).
Tells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
card already has files stored on it and the largest sequential number in
the existing file names is greater than the largest sequential number
remembered
by the camera, numbering of new files will start from the
largest sequential number in the existing file names plus 1.
Restarts the serial number from 0001 whenever all files are deleted or
when the memory card is replaced with a blank one. If a memory card
is loaded and that card already has files stored on it, numbering of new
files will start from the largest sequential number in the existing file
names number plus 1.
154
Other Settings (Set Up)
Advertisement
Table of Contents
