Table of Contents
Advertisement
Flash
1. In the REC mode, press [V]
( _ _ ) once.
2.
Use [,]
and [,]
to select the flash
setting you want and then press [SET].
When the "[]
Panel" menu item (page 150)
is "Hide" (so the Control Panel is not
displayed), pressing [V] ( _ { ) will cycle
through the available flash settings.
[v](_)
Flash fires automatically
in accordance
with exposure
amount of light and brightness) conditions.
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Soft flash always fires, regardless of exposure conditions
Flash fires automatically.
This type of flash can be used to
reduce the chance of redness in the subject's eyes.
3.
Press the shutter button to shoot.
Back lamp
Flashes
orange
while the flash is charging
to indicate
I1_"
_
]// that image
recording
is disabled.
III _'_1
J J[ • You will not be able to take another
flash snapshot
until the lamp stops flashing
orange,
which
indicates
[]
indicates
the flash will fire.
that charging
is complete.
• For information
about Flash Range, see page 191.
36
Snapshot Tutorial
Advertisement
Table of Contents
