Casio Exilim EX-S12 User Manual page 186

You are attempting to turn off power while image data is being
transferred using the Eye-Fi card (page 139).
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
The printer ran out of paper while printing.
Memory is full with images you recorded and/or files saved by
editing operations. Delete files you no longer need (page 29).
An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Image compression could not be performed for some reason
during image data storage. Shoot the image again.
The lens came into contact with an obstruction while moving.
The camera will turn off automatically when this message
appears. Remove the obstruction and turn power back on
again.
Your camera system is corrupted. Contact your retailer or an
authorized CASIO authorized service center.
The LOCK switch of the SD or SDHC memory LOCK
card loaded in the camera is in the locked
position. You cannot store images to or delete
images from a memory card that is locked.
There are no files in built-in memory or on the memory card.
There are currently no files specified for printing. Configure
the required DPOF settings (page 120).
The setup you are trying to save is for an image that cannot
be saved as a user BEST SHOT scene.
The memory card loaded in the camera is not formatted.
Format the memory card (page 161).
186 Appendix