Table of Contents
Advertisement
_NOTE
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
• The camera also records audio. Note the following points when shooting a movie.
- Take care that the microphone
is not blocked by your
fingers, etc.
- Good recording results are not possible when the camera is
too far away from what you are trying to record.
- Operating camera buttons while shooting can cause button
noise to be picked up in the audio.
Microphone
• Shooting a very bright subject can cause a vertical band or a
pink cast on the monitor screen image. This does not indicate
malfunction.
• Use of certain types of memory cards increase the time it takes to record movies,
which can cause movie frames to be lost. This condition is indicated by []
and
flashing on the monitor screen. To avoid loss of movie frames, use of a memory
card with a maximum transfer speed of at least 10MB per second is recommended
(page 175).
• Only digital zoom can be used for zooming during movie recording. Since optical
zoom is not possible while recording a movie, zoom as required before pressing
[Q] to start recording.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended
under these conditions.
• Auto Focus and Macro Focus become fixed focus while shooting a movie (page
66).
51
Recording Movie Images and Audio
Advertisement
Table of Contents
