Table of Contents
Advertisement
The Control Panel can be used to configure camera settings.
1. In the REC mode,
press
[SET].
This will select one of the Control Panel icons and display its settings.
[A] [V] [_] [1_]
Available settings
Control Panel
[SET]
2. Use [A]
and [V] to select the setting you want to change.
@Image
size/Quality*
(pages 33, 82)
@Flash
(page 36)
@AF Area (page 38)
@Lighting
(page 39)
@Continuous
shutter (page 40)
@ Face Detection (page 43)
@Make-up
(page 45)
@ EV shift (page 46)
@Date/Time
(page 47)
* Snapshot image quality cannot be changed using the Control Panel.
3.
Use [,]
and [_,] to change
the setting.
4.
If you want to configure
another
setting,
repeat steps
2 and 3.
5.
After all of the settings
are the way you want,
press
[SET].
This will apply the settings and return to the REC mode.
_NOTE
• You can configure the camera to turn off display of the Control Panel when you
press [SET] (page 150).
• You also can configure settings other than those listed above (page 64).
• The Control Panel cannot be displayed while a Dynamic Photo, Prerecord Movie,
For YouTube, or Voice Recording Operation is in progress.
B
31
Snapshot Tutorial
Advertisement
Table of Contents
