Table of Contents
Advertisement
[MENU]
---_ Set Up Tab ---_ USB
You can use the procedure below to select the USB communication
protocol, which is
used when exchanging data with a computer, printer, or other external device.
Se,ect
,his settin0
hen connectin0
to a co .u,er
.a0es
i !!ii! ¸
S' o_ _
i_ ;1134 ) With this setting, the computer sees the camera as an
external storage device. Use this setting for normal transfer of
images from the camera to a computer.
Select this setting when connecting toe printer that supports
p_
PictBridge (page 118). This setting simplifies the transfer of image
data to the connected device.
[MENU]
---_ Set Up Tab ---_ Video
Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
Video system used in Japan, the U.S., and other countries
Video system used in Europe and other areas
Normal TV screen aspect ratio
Wide screen aspect ratio
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera's video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
160
Other Settings (Set Up)
Advertisement
Table of Contents
