Table of Contents
Advertisement
1.
Use the AV cable that comes with the camera
to connect
it to the TV.
Yellow
ite
AV cable (bundled)
USB/AV port
AUDIO
IN jacks (white)
VIDEO
IN jack
(yellow)
I--
Making
sure that the •
mark on the camera
is aligned
with the •
mark
of the AV cable connector,
connect
the cable to the camera.
• Make sure that you insert the cable connector into the
USB/AV port until you feel it click securely into place.
Failure to insert the connector fully can result in poor
communication
or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as shown in the
illustration.
2.
Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
.
Press [1"_1] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera's monitor screen.
• Pressing [ON!OFF] or [1_11](REC) will not turn on the camera while the AV
cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 160).
94
Viewing Snapshots and Movies
Advertisement
Table of Contents
