Table of Contents
Advertisement
1.
With the camera
turned off, hold down [,]
and [i-_1] (PLAY) until the
Image Roulette
screen
appears
on the monitor
screen.
The Image Roulette screen will cycle randomly through all the snapshots that are
currently in memory and finally stop at one.
• To perform the Image Roulette operation again, press [,]
or [1_].
• To exit the Image Roulette screen, press [It's] (REC) to enter the REC mode or
[ON/OFF] to turn off the camera.
• For a rotated snapshot (page 109), the Image Roulette screen shows the
unrotated version.
• The camera will exit Image Roulette automatically
if you do not perform the
next Image Roulette operation within about one minute after the final image of
the previous operation appears on the monitor screen.
• Note that Image Roulette works only with images shot with this camera. Image
Roulette may not operate properly when other types of images are in memory.
• You can use Image Roulette only when [O]
(REC) and [I-_--I](PLAY)
operations (page 159) are configured for "Power On" or "Power On/Off".
96
Viewing Snapshots and Movies
Advertisement
Table of Contents
