3. Use [A]
and [V] to select the menu item
you want, and then press [,].
4. Use [A]
and [V] to change
the setting.
5.
After the setting
is the way you want, press
[SET].
• Pressing [,]
registers the selected setting and
returns to the menu.
• To configure settings on another tab after
pressing [,]
to return to the menu, use [,&] to
move the highlighting
up to the tabs, and then
use [_] and [1_] to select the tab you want.
Example:
When
"Focus"
is selected
on the "REC" tab
Tabs
Settings
•
Menu
Operations
in This Manual
Menu operations are represented in this manual as shown below. The following
operation is the same one described under "Example Menu Screen Operation" on
page 64.
Use [._] and [1_] to select the "REC" tab.
[O]
(REC)_---_
[MENU]_---_
REC Tab_---_
Focus
Press
Press
Use [,k] and [V] to select the "Focus"
[O]
(REC).
[MENU].
and then press [1_].
65
Advanced Settings