Do Not Print Blank; Toner Save; Booklet Modes - Toshiba e-Studio 350 Printing Manual

— Do not Print Blank Pages
The Blank page mode can be selected using the following option.

— Toner Save

The toner save mode can be set using the following option.
Example: The command to set the toner save mode is "lp –o tonersave=on filename".

— Booklet Modes

The booklet mode can be selected using the following options.
•
NOTE:
316
Option Value Alternate
Value
blankpage=0
blankpage=1
Option Value Alternate
Value
tonersave=on ON
tonersave=off OFF
Booklet printing is available only when the ADU is installed.
Option Value Alternate
Value
booklet= lt
letter
LT
booklet= a4
A4
booklet= lg
legal
LG
booklet= st
statement
ST
booklet= ld
ledger
LD
booklet= folio-japan
folio
booklet= a3
A3
booklet= a5
A5
booklet= b4
B4
B4-JIS
b4-jis
booklet= b5
B5
B5-JIS
b5-jis
Description
Set the blank page mode (disable Do not Print Blank Pages).
Cancel the blank page mode (enable Do not Print Blank Pages).
Description
Set the toner save mode.
Cancel the toner save mode.
Description
Select letter size paper for booklet printing mode.
Select A4 size paper for booklet printing mode.
Select legal size paper for booklet printing mode.
Select statement size paper for booklet printing mode.
Select ledger size paper for booklet printing mode.
Select folio size paper for booklet printing mode.
Select A3 size paper for booklet printing mode.
Select A5 size paper for booklet printing mode.
Select JIS B4 size paper for booklet printing mode.
Select JIS B5 size paper for booklet printing mode.
Printing Guide — Printing from UNIX