Toshiba e-Studio 350 Printing Manual page 248

11) Memory
12) Enable SNMP Communication
13) [Update Now]
•
NOTE:
14) Update Automatically
•
NOTE:
248
Select the size of memory installed.
For e-STUDIO450 Series and e-STUDIO280 Series:
Only "32MB" is selectable for e-STUDIO450 Series and e-STUDIO280 Series.
Check this to enable obtaining the configuration information from this equipment.
Click this to obtain the configuration information from this equipment immediately. This is
available only when "Enable SNMP Communication" is checked.
If the connection to the equipment has not been configured correctly, the message
"The address of your printer could not be located. Would you like to find it?" will be
displayed when you click [Update Now]. If it is displayed, click [Yes] and search for
the equipment using the TopAccessDocMon Local Discovery dialog box. After
searching the equipment, the SNMP communication will be enabled.
instructions on how to search the equipment, refer to the instructions of TopAccess-
DocMon.
P.335 "Searching for a Printer"
Check this to update the configuration information every time the printer driver is opened.
This is available only when "Enable SNMP Communication" is checked.
If the connection to the equipment has not been configured correctly, the message
"The address of your printer could not be located. Would you like to find it?" will be
displayed when the Configuration tab is displayed. If it is displayed, click [Yes] and
search for the equipment using the TopAccessDocMon Local Discovery dialog box.
After searching the equipment, the SNMP communication will be enabled. For the
instructions on how to search the equipment, refer to the instructions of TopAccess-
DocMon.
P.335 "Searching for a Printer"
Printing Guide — Printing from Windows
For the