Installing The Client Software For Ipp Printing; Installation For Ipp Printing By Add Printer Wizard - Toshiba e-Studio 350 Printing Manual

Multifunctional digital systems
Hide thumbs Also See for e-Studio 350:
Table of Contents

Advertisement

10.
NOTE:

Installing the Client Software for IPP Printing

This section describes how to set up the printer drivers for IPP printing which is available for
Internet connection.
To set up the printer drivers for IPP printing, install the printer drivers by Add Printer Wizard,
and then install the other software that you require.
PREPARATION:
NOTE:

Installation for IPP Printing by Add Printer Wizard

Installing the printer driver for IPP printing by Add Printer Wizard
The following describes an installation on Windows 2000. The procedure is the same when
Windows XP or Windows Server 2003 is used.
REQUIREMENT:
Printing Guide — Installing Client Software for Windows
9.
Select the created peer-to-peer port in the "Print to the follow-
ing port" drop down box.
Click [OK] to save settings.
Before using the printer driver for printing, please configure the installed options of
the equipment and department code (if required) on the printer driver.
P.204 "Before Using the Printer Driver"
Before installing the printer driver for IPP printing, check with your system adminis-
trator to make sure of the following:
- This equipment is connected to the network and turned on.
- The TCP/IP setting is correct on this equipment and your computer.
IPP Printing is only available for Windows 2000, Windows XP, and Windows Server
2003.
You must log into Windows as a user who has the "Administrators" or "Power Users"
privilege.
127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents