Installation For Parallel Printing By Plug And Play; Windows 98/Me - Toshiba e-Studio 350 Printing Manual

•
NOTE:

Installation for Parallel Printing by Plug and Play

The procedure to install the printer driver for Parallel printing by Plug and Play differs depend-
ing on the version of the Windows being used.
•
SUPPLEMENTS:
•
•
NOTE:

— Windows 98/Me

Installing the printer driver for parallel printing by Plug and Play
The following describes an installation on Windows 98. The procedure is the same when Win-
dows Me is used.
Printing Guide — Installing Client Software for Windows
Before using the printer driver for printing, please configure the installed options of
the equipment and department code (if required) on the printer driver.
P.204 "Before Using the Printer Driver"
P.31 "Windows 98/Me"
P.34 "Windows 2000"
P.37 "Windows XP/Server 2003"
TopAccessDocMon is not available when this equipment is only connected using
the printer cable. However, when this equipment and your computer are connected
to the local area network as well as this equipment is connected to the parallel port
of your computer, you can use TopAccessDocMon to monitor your print jobs. To
install TopAccessDocMon, you must install it from the Client1 CD-ROM separately.
The Agfa Font Manager is also available to install and manage the TrueType fonts
on your computer. To install the Agfa Font Manager, you must install it from the
Client1 CD-ROM separately.
For e-STUDIO450 Series and e-STUDIO280 Series:
Agfa Font Manager is not included in the Client1 CD-ROM. You must install it from the Font
CD-ROM that comes with the Printer Kit or Printer/Scanner Kit.
The Plug and Play function is not supported in the Windows NT 4.0.
1.
Connect the printer cable to this equipment and your com-
puter, and then power on the equipment and your computer.
• The Add New Hardware Wizard dialog box appears.
2.
Click [Next].
31