Configuring The Print Queue - Toshiba e-Studio 350 Printing Manual

•
NOTE:

Configuring the Print Queue

After you copy UNIX Filters, you can configure the print queue.
There are two ways to configure the print queue: one is creating a print queue using est4511add/
estbwadd, and the other is creating a print queue manually without using est4511add/estbwadd.
Printing Guide — Installing Client Software for UNIX
• For HP-UX:
uname -a
Output on screen should be:
HP-UX
• For IBM AIX:
uname -a
Output on screen should be:
AIX
• For Linux:
uname -a
Output on screen should be:
Linux
• For OpenUnix:
uname -a
Output on screen should be:
OpenUNIX
If the output is not as above, ask your administrator.
4.
Change to the root directory.
5.
Enter the following command:
• For Solaris:
tar xvf solaris.tar
• For HP-UX:
tar xvf hpux.tar
• For IBM AIX:
tar xvf aix.tar
• For Linux:
tar xvf linux.tar
• For OpenUnix:
tar xvf openunix.tar
6.
The command extracts all the required files and installs them
in the correct locations. Continue the procedure for configur-
ing the print queue.
P.187 "Configuring the Print Queue"
P.188 "Creating a Print Queue Using est4511add/estbwadd"
P.188 "Creating a Print Queue Manually"
187