Loading Roll Paper - Epson 24-Pin User Manual

To remove the roll paper holder, carefully lift up the printer and
pull out the roll paper holder from beneath the printer.

Loading roll paper

After you install the roll paper holder, follow the steps below to
load a roll of paper,
1. Make sure the printer is turned off. Open the paper guide
cover and remove the paper guide.
2. Make sure the paper tension unit is installed.
3. Set the paper thickness lever (located under the printer cover)
to the proper position for the thickness of your roll paper.
4. Set the paper release lever to the single-sheet position.
5. Cut the leading edge of the roll paper straight across.
6. Insert the roll paper holder shaft into the center of the paper
roll as shown.
A-22
Enhancing Your Printer With Options