Single-Sheet Paper Loading Or Feeding Problems - Epson 24-Pin User Manual

Single-sheet paper loading or feeding problems

The printer does not load single-sheet paper or does not feed
it properly.
Cause
The paper release lever is set
to a tractor position.
Continuous paper is in the
paper path.
The paper on the paper
guide is positioned too far to
the right for the printer to
detect that it is there.
Single-sheet paper is not
loaded properly.
The paper thickness lever is
not set correctly.
Your paper is creased, old,
too thin, or too thick.
7-6
Troubleshooting
What to do
Set the paper release lever to the
single-sheet position. For more
information on setting the paper
release lever, see Chapter 2.
Set the paper release lever to the
appropriate tractor position and press
the Load/Eject button to feed the
continuous paper to the standby
position. Then set the paper release
lever to the single-sheet position. (See
"Switching to printing on single
sheets" on page 2-29 for more
information.)
Move the paper a little to the left.
See Chapter 3 for instructions on
loading single-sheet paper.
Set the paper thickness lever to match
the thickness of your paper. See
"Setting the Paper Release Lever" on
page 2-2.
See the paper specifications in
Appendix C and use new, clean sheets
of paper.