Using The Push Tractor; Loading Paper Onto The Push Tractor - Epson 24-Pin User Manual

Using the Push Tractor

To use the push tractor, load continuous paper in the rear slot. For
information on when to use the push tractor, see "Available Paper
Paths" on page 4.
Note:
The tractor is installed in the push position when the printer is shipped.
If a tractor is not installed in the push position, go to "Reinstalling the
tractor in the push position" on page 2-13.

Loading paper onto the push tractor

If a tractor is installed in the pull position, you need to remove it
and install the paper tension unit as described on "Removing the
pull tractor" on page 2-24 before using the push tractor.
Note:
To avoid paper jams, it is best to load thick multipart forms using the
front or bottom slot and the pull tractor.
c
Caution:
Do not load continuous paper with labels in the rear paper slot;
the labels may come off their backing sheet inside the printer and
cause a paper jam.
2-6
Printing on Continuous Paper