Epson 24-Pin User Manual page 127

Follow these steps to select a built-in font or pitch using the
buttons on the printer's control panel:
1. Make sure that the printer is not printing. If it is, wait until
printing has finished.
2. To select a font, press the Font button until the three Font
lights indicate the font you want as shown below.
Font lights
o o n
o n o
o n n
n o o
n o n
n n o
n n n
n = On, o = Off
* others means the font selected in the default-setting mode
Note:
The Font button cannot directly select OCR-B, Orator, Orator-S,
Script-C, Roman-T, or Sans Serif H. To select one of these fonts, you
must first use the default-setting mode to register it as the "other"
font. Note that the default "other" setting is Roman-T.
3. Press the Condensed button to turn the condensed mode on
or off. The table below shows normal and condensed printing.
Changing Printer Settings From the Printer's Control Panel
Font
Draft
Roman
Sans Serif
Courier
Prestige
Script
Others
5
5-3