Epson 24-Pin User Manual page 62

6. Slide the right sprocket to match the width of your paper, but
do not lock it. Move the paper support midway between the
two sprockets as shown in step 5.
7. Make sure your paper has a clean, straight edge. Then open
both sprocket covers.
8. Insert the paper into the front, bottom, or rear paper slot as
described below until it emerges between the platen and the
ribbon guide. Then pull up the paper until the perforation
between the first and second pages is even with the top of the
printer's ribbon.
Before you load paper in the
front slot, open the front cover
and remove it. Then load
paper printable side up.
Load paper in the bottom slot
printable side up (forward).
Before you load paper in the
rear slot, remove the paper
guide. Then load paper in the
rear slot, printable side down
and attach the paper guide.
2-18
Printing on Continuous Paper