Loading Paper In The Single-Bin Cut-Sheet Feeder - Epson 24-Pin User Manual

3. To replace the printer cover, first insert the front tabs into the
slots on the printer, then lower the cover into place.
If you installed the double-bin cut-sheet feeder, you need to select
your paper path (bin 1 or bin 2). See "Selecting your paper path
(bin 1 or bin 2)" on page A-17.
You are now ready to load paper with your single-bin, high-
capacity, or double-bin cut-sheet feeder.

Loading paper in the single-bin cut-sheet feeder

The single-bin cut-sheet feeder holds up to 50 sheets of paper.
When the single-bin cut-sheet feeder is installed, you can still use
the paper guide to load single sheets and envelopes one at a time.
c
Caution:
Do not load multipart forms, carbon paper, envelopes, or labels
in the single-bin cut-sheet feeder.
1. Make sure the paper guide is removed, and set the paper
thickness lever to the single-sheet position. Also make sure
the paper thickness lever (located under the printer cover) is
set to the proper position for your paper's thickness.
A-8
Enhancing Your Printer With Options