Setting Up Your Firewire Port - Epson 10600 Printer Manual

1-32 | Setting Up the Printer
Note
You may see an
additional Found New
Hardware screen for
IEEE-1394. If so, be sure
to browse to the correct
folder for your ink type
and operating system.

Setting Up Your FireWire Port

If you're connecting with FireWire (IEEE-1394) on a Windows system, you
may see a Found New Hardware Wizard for an EPSON 1394 Printer. If so,
follow the steps below to install the driver software for the port. When done,
resume installing the printer software where you left off.
1. At the first Found New Hardware screen, click
2. At the screen below, click
.
Next
3. Select
Specify a location
4. Click the
Browse
the EPSON CD-ROM:
If your printer uses Archival ink, browse to
•
the
Drivers\Cf\Win2K_XP
If you're printer uses Photographic Dye, browse to
•
the
Drivers\Dye\Win2K_XP
If you're printer uses UltraChrome ink, browse to
•
the
Drivers\Uc\Win2K_XP
5. Click , then click
OK
6. When done, click
installation instructions where you left off.
1-32
Search for a suitable driver
and click
Next
button and locate the correct
folder
folder
folder
to install the driver.
Next
. Then return to the printer software
Finish
.
Next
, then click
.
folder on
Win2K_XP