Note
These settings override
settings made through
the control panel.
Note
Select Landscape only
if you want to rotate your
image 90°.
Printing with EPSON Drivers for Macintosh
3. Select the type of paper you loaded (
list.
Paper Source
If your image is more than 90.5 inches long, select
. You can also use this setting to print a series of continuous
(Banner)
images without any "margin space" between them.
4. If you're using roll paper, you can set the following options:
•
Auto Rotate
Saves paper if your document length is shorter than the printable
width of the paper roll. Your image is rotated automatically by
90 degrees and printed crosswise.
•
Auto Cut
Choose this option if you want the paper to be cut automatically
after each page is printed (not available for thicker media types).
•
Print Page Line
Prints trim lines on the right and bottom edges of your pages.
•
Save Roll Paper
Saves paper by not feeding the blank portion of the last page of your
document. Available only when you've selected
as the Paper Source.
(Banner)
5. Make the settings you want for
(available when
Printable Area
6. After making your settings, click
3-3
or
Roll Paper
Sheet
Roll Paper
Roll Paper
,
Orientation
Reduce or Enlarge
is set to
Paper Source
.
OK
|
3-3
) from the
, and
).
Sheet