Restoring Default Settings - Epson 10600 Printer Manual

Turning Off Paper Monitoring
The printer normally stops and displays an error message if you try to print
an image wider than the paper, or if paper is fed at an angle. You can turn off
the paper size check and/or paper alignment check if you don't want to use
these monitoring features. However, ink may be sprayed on the platen if you
print an image that is too wide for the paper. Follow these steps to turn off
paper monitoring:
1. Press the
SelecType
the display.
2. Press the button repeatedly until
Item
PAPER ALIGN CHK=ON
3. Press the or button.
+ –
appears on the display.
CHK=OFF
4. Press the button to save your new setting.
Enter
5. Press the or
Pause

Restoring Default Settings

You can erase all settings you have made in the Printer Setting menu and
restore them to their default values. Follow these steps:
1. Press the
SelecType
the display.
2. Press the button repeatedly until
Item
the display.
3. Press the button to erase all settings and restore the defaults.
Enter
4. Press the or
Pause
2-27
Using Paper and Other Media
button.
PRINTER SETTING MENU
PAPER SIZE CHK=ON
appears on the display.
PAPER SIZE CHK=OFF
button to exit the Printer Setting menu.
SelecType
button.
PRINTER SETTING MENU
INIT SETUP=EXEC
button to exit the Printer Setting menu.
SelecType
| 2-27
appears on
or
or
PAPER ALIGN
appears on
appears on