You see the Utility menu:
Click to run a
nozzle check
4. Click the
Nozzle Check
pattern.
5. Examine the printed pattern. It should be complete, with no gaps or
missing dots, as shown below; in addition, all the dots should be in place
and not deflected. (You may need to use an eye loupe to check the
pattern.)
6. If the pattern is complete, click
continue on to "Aligning the Print Head" on page 1-39.
1-37
Setting Up the Printer
button, then click
Print
and close the Utility menu, then
Finish
|
1-37
to print a nozzle check