Epson GT-30000 User Manual page 43

4. Select
Specify a location
necessary. Browse to
EPSON\English\WIN98
CD-ROM drive. Then click
(The example on the right shows "E"
as the CD-ROM drive. Your
CD-ROM drive letter may be
different.)
5. Follow the instructions on the screen.
If you see a message asking for your Windows 98 CD-ROM, insert it and click
(or select
OK Specify a location
source files on your hard drive. Then click
scanner software CD-ROM.
6. When you see the Screen Calibration window,
move the slider right or left until the stripes
match as closely as possible. (The stripes will
not match perfectly. The recommended setting
is 1.8.) Then click
The EPSON Screen Calibration Utility
calibrates the preview image you see in your
EPSON TWAIN HS driver to match your
monitor settings.
You won't need to change the screen calibration as long as you continue
to use the same display. If you need to recalibrate your screen at a later
time, double-click the Scanners and Cameras icon in your Windows
Control Panel to open the Scanners and Cameras Properties window.
Select EPSON GT-30000 on the Devices tab, if necessary, and click the
Properties button to display the EPSON GT-30000 Properties window.
Click the Utility tab, and then click the Screen Calibration Utility button.
7. When installation is complete, click
Continue with the instructions in the next section to install Acrobat Reader, if
necessary, and register your scanner online.
, if
on your
.
Next
, click
.
OK
Finish
, and locate the Windows 98
Browse
.) When prompted, reinsert your
OK
.
Installing the Software
37