Installing The Automatic Document Feeder - Epson GT-30000 User Manual

Installing the Automatic Document Feeder

The automatic document feeder (ADF) automatically loads multi-page documents
into your scanner.
The ADF is large and heavy. Clear a wide space around the scanner before
installing the ADF. You may need to have someone help you unpack and
lift it.
Make sure you have released the transportation lock before installing the
ADF. For details, refer to page 13.
To install the ADF:
1. Make sure your scanner is turned off, then unplug the scanner's power and
interface cables, if necessary.
2. Insert the installation screws that came with the ADF into the holes in the back of
the scanner and secure them with the enclosed screwdriver tool, as shown below.
3. Place the two knobs included with the ADF beside the scanner.
14
Setting Up Your Scanner