Source Technologies ST9530 User Manual page 51

Macro Definition Error
Macro Definition Error
Macro Definition Error
Non-hexadecimal Value
Received
Non Integer Value Received
Integer string incorrect length
MICR Definition Line Count
Error
MICR Password Error
Secure MICR Printer User's Guide
September 2005
Invalid decode
mode specified
Macro ID greater
than 32767 limit.
Macro size exceeds
available space
Non-hexadecimal
value received.
Non integer value
received.
Integer string
incorrect length
Password Length
Error.
47
regular toner is
present, the printer
will stop all printing
and display this
message.
The Load Flash
Resource Command
contained an invalid
character specifying
the format of the file.
Must be either a D
or S.
The resource
number in the Load
Flash Resource
Command
(&%STL...) was over
the 32767 limit.
Flash resource file
size specified in the
Load Flash
Resource Command
is too large for the
available space
remaining in the
flash module.
A command
contained a non-
hexadecimal value
in a parameter.
A parameter in a
command was not
an integer.
A parameter in a
command was not
the correct length.
The number of digits
in the MICR
definition Command
is not equal to four,
or there is a non-
hexadecimal
character in the
count.
Password length is
not equal to eight
© Source Technologies
All Rights Reserved
toner is not available,
you must power-off
your printer and
restart the print job at
a later time when
MICR toner is
available.
Check the Command
(&%STL...) for syntax
errors.
Check the Load
Flash Resource
Command for
syntax/numbering
errors.
Format flash memory
to remove all existing
resources or upgrade
flash memory to a
larger module.
Check the Command
(&%STL, STY)
syntax for errors.
Check the command
(&%STL, STS,
STP)
for syntax/
numbering errors.
Check the Command
(&%STP, STS) for
syntax/numbering
errors.
Check your software
for errors in the MICR
definition Command
(SMCP).
Check the Password
Command in your