Ceiling; Rear; Screen Aspect; Reset - Panasonic PT-EZ570UL Operating Instructions Manual

Ceiling

This function is used to project the image from a
ceiling-mounted projector.
1 ) Press ▲▼ to select [Ceiling] and then
press the <ENTER> button.
2 ) Press ▲▼ to change the image.
When this function is set to [On], the picture will
z
be top/bottom and left/right reversed.

Rear

This function is used to project the image from rear of
the screen.
1 ) Press ▲▼ to select [Rear] and then
press the <ENTER> button.
2 ) Press ▲▼ to change the image.
When this function is set to [On], the picture will
z
be left/right reversed.

Screen aspect

This function is used to project the image to a 4:3 or
16:9 projection screen.
1 ) Press ▲▼ to select [Screen aspect
and then press the <ENTER> button.
2 ) Press ▲▼ to choose one from the
items as below.
*
This function is not available for
series
.
16:10 is the aspect of the LCD
Default(16:10)
panel.
16:9 Set to a 16:9 projection screen.
4:3 Set to a 4:3 projection screen.
Note
When the [4:3] function is selected, [Natural wide] is not
z
available in the AV screen.
When the [16:9] function is selected, [Wide (16:9)] is not
z
available in the AV screen.
*
]
EX600 series, EX500

Reset

To reset the adjusted data, all adjustments will return
to their previous figures.
Press ▲▼ to select [Reset] and then
press the <ENTER> button.
A confirmation box appears and then select
z
[Yes].
Screen
61
ENGLISH -