AUTO PC adjust
Select [PC adjust] from the Main Menu (see
"Navigating through the menu" on page 47),
then select the item from the sub-menu.
Remote Control
Auto PC adj.
Auto PC adjustment function is provided to
automatically adjust [Fine sync], [Total dots], [Position
H] and [Position V] to conform to your computer.
Press ▲▼ to select [Auto PC adj.] and
then press the <ENTER> button.
[Please wait...]
z
adjustment is in process.
To store adjustment parameters
The adjusted parameters from the Auto PC adjustment
can be stored in the projector. Once the parameters
are stored, the setting can be done just by selecting a
Mode (1–10) in the PC System Menu (see page 50).
See also [Store] on page 54.
Attention
[Fine sync], [Total dots], [
z
V
] of some computers cannot be fully adjusted with
the Auto PC adjustment function. When the image
is not provided properly with this operation, manual
adjustments are required (
The Auto PC adjustment cannot be operated when
z
[480i], [576i], [480p], [576p], [720p], [1 035i] or
[1 080i] is selected in the PC System Menu (
50), or when the signal is coming from the HDMI or
DVI-D terminal.
52
- ENGLISH
Side Control
appears while the Auto PC
Position H
Position
] and [
Æ
pages 53-54).
Æ
page