Table of Contents
Advertisement
Setting
Select [Setting] from the Main Menu (see
"Navigating through the menu" on page 47),
then select the item from the sub-menu.
Remote Control
Language
1 )
Press ▲▼ to select [Language].
2 )
Press ► or the <ENTER> button.
3 )
Press ▲▼ to select the desired
language.
For example: PT-EZ570U
The language used in the On-Screen Menu is
z
available in English, German, French, Italian,
Spanish, Portuguese, Russian, Chinese, Korean,
and Japanese
.
Menu/Menu position
[Menu] function is only for EZ570 series.
[Menu position] function is only for EW630 series,
EW530 series, EX600 series and EX500 series.
Side Control
Position
J
This function is used to change the position of the On-
Screen Menu.
1 )
Press ▲▼ to select [Position].
2 )
Press the <ENTER> button to change
the position.
The Position changes each time you press
z
<ENTER> button as follows:
the center → the bottom left → the bottom right → the
top left → the top right → the center......
Menu size
J
*
1
This function is used to change the display size of the
On-Screen Menu.
1 )
Press ▲▼ to select [Menu size] and
press the <ENTER> button.
2 )
Press ▲▼ to switch the [Menu size]
function between [Normal] and
[Double].
Normal
Display the On-Screen Menu on the
screen in its normal size.
Double
Display the On-Screen Menu on the
screen in its double normal size.
*1 :
This function is only for EZ570 series
Input button
This function detects the input signal automatically.
When a signal is found, the search will stop.
1 )
Press ▲▼ to select [Input button].
2 )
Press the <ENTER> button.
3 )
Press ▲▼ to select these functions as
follows:
Mode 1
Input search will not work*
Mode 2
Input search works*
Mode 3
Input search works*
*1 :
Input search will not work.
*2 :
Input search works under the following situation:
● When pressing the <INPUT> button on the remote
control or on the side control.
*3 :
Input search works under the following situation:
● When turning on the projector by pressing the
<POWER ON> button on the remote control
or the<
> button on the side control.
● When pressing the <INPUT> button on the remote
control or the side control.
● When no signal is detected.
.
.
1
2
3
●●●●●
63
ENGLISH -
- Quick Links:
- Lamp Unit
Hide quick links:
Advertisement
Table of Contents
