Turning On The Projector - Panasonic PT-EZ570UL Operating Instructions Manual

Powering ON/OFF

Turning On the Projector

1 ) Complete peripheral connections (with a
computer, VCR, etc.) before turning on the
projector.
2 ) Connect the projector's AC power cord into an
AC outlet. The <ON(G)/STANDBY(R)> indicator
lights red.
3 ) Press the <
the <POWER ON> button on the remote control.
The <ON(G)/STANDBY(R)> indicator lights
green and the cooling fans start to operate. The
preparation display appears on the screen and
the count down starts.
4 ) After the countdown, the input source that was
selected the last time and the lamp power status
icon appear on the screen.
If the projector is locked with a PIN code, PIN
code input dialog box will appear. Enter the PIN
code as instructed on the next page.
Note
When the [Logo select] function is set to [Off], the logo
z
will not be shown on the screen (
When [Countdown off] or [Off] is selected in the [Display]
z
function, the preparation display will not be shown on the
screen ( Æ page 64).
When the [Direct on] function is set to [On], the projector
z
will be turned on automatically by connecting the AC
power cord to an AC outlet.
The Lamp replacement icon and the Filter replacement
z
icon may appear on the screen depending on the usage
state of the projector.
When the [Picture in Picture] function is set to User
z
1-5, User 1-5, Input source, Lamp power status, Lamp
replacement icon and Filter warning icon will appear on
the screen for 10 seconds.
38
- ENGLISH
(2)
> button on the side control or
Æ page 64).
(3)
(3)
Preparation display
06
The preparation display will disappear
after 30 seconds
.
Initial display
Input source
Lamp power status