Filter Counter; Test Pattern; Factory Default - Panasonic PT-EZ570UL Operating Instructions Manual

Filter counter

This function is used to set a frequency for the filter
replacement.
1 ) Press ▲▼ to select [Filter counter].
2 ) Press ► or the <ENTER> button to
access the submenu items.
Filter counter
J
Show the total accumulated time of the filter use timer
setting.
Filter counter remaining
J
The remaining time for the filter counter is displayed
in units of 10%.
This is displayed in red when the remaining time is 10%.
z
Filter counter timer
J
To set a timer. When the projector reaches the
selected time the filter warning icon appears on the
screen.
1 ) Press ▲▼ to select [Filter counter
timer] and then press the <ENTER>
button.
2 ) Press ▲▼ to set the timer.
Select from [Off/1000H/2000H/3000H/
z
4 000H/6000H/8000H/9000H/12000H]
depending on the use environment.
The situation which different icons appear as
z
below shown:
When the remaining time is less
than
10%
When the remaining time is 0, the
filter replacement is necessary.
When the projector reaches
a time set by user in the timer
setting.
Filter counter reset
J
After replacing the filter, be sure to reset the timer.
1 ) Press ▲▼ to select [Filter counter
reset].
2 ) Press the <ENTER> button.
[Filter counter Reset?] appears. Select [Yes]
z
to continue. Another confirmation dialog
box appears, select [Yes] to reset the [Filter
counter].
.

Test pattern

Results of adjustment of the position , size and other
factors are not reflected in test patterns. Ensure the
input signal is displayed before performing various
kinds of setting.
1 ) Press ▲▼ to select [Test pattern].
2 ) Press ► or the <ENTER> button to
access the submenu items.
3 ) Press ▲▼ to go backwards and
forwards between test patterns as
below.
[Color], [Gradation 1], [Gradation 2],
z
[Gradation 3], [Gradation 4], [All white], [All
black] and [Cross].
Note
Even while the test pattern is displayed, the zoom,
z
focus, lens shift, shutter, and power off functions
take priority.

Factory default

This function returns all setting values except for [PIN
code lock], [Logo PIN code lock] and [Filter counter]
to the factory default settings.
1 ) Press ▲▼ to select [Factory default].
2 ) Press the <ENTER> button.
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another confirmation dialog
box appears, select [Yes] to return to [Factory
default].
Setting
71
ENGLISH -