Error Information Page; Network Status Page - Panasonic PT-EZ570UL Operating Instructions Manual

Network

Error information page

J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen,
click the part to display the details of the error.
•
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
Parameter
MAIN CPU BUS
FAN
INTAKE AIR TEMPERATURE
AROUND LAMP TEMPERATURE
OPTICS MODULE TEMPERATURE
LAMP REMAIN TIME
LAMP STATUS
APERTURE(CONTRAST-SHUTTER)
SHUTTER
AIR FILTER
FILTER UNIT

Network status page

J
Displays the current configuration information of the network.
Displays the configuration details of wired LAN.
78
- ENGLISH
When [FAILED] has appeared for an item
Trouble has occurred in the microcomputer circuitry. Consult your dealer.
Trouble has occurred in the fan or its drive circuit. Consult your dealer.
Intake air temperature is high. It could be because it is used in an environment of high
temperature such as close to a heating device, etc., the air intake is blocked, or the air
filter is clogged.
The temperature around the lamp is too high. Exhaust may be blocked, or [Fan control]
mode may be set wrong. See [Fan control] of the Functional Manual. (
Optics module temperature is high. The exhaust air port maybe blocked or the air filter
is clogged.
The lamp runtime has exceeded the prescribed cumulative time, and it is now time to
replace the lamp.
The lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
There is a problem with shutter.
There is a problem with the air filter unit.
The air filter unit is not installed.
OK: Normal operation
FAILED : Occurrence of trouble
WARNING: Warning
Description

Æ
page 66)